Description
Introduction
IKG320 down the hole drill rig,DTH Drilling rig for mining for open use is an improved device in compliance with national regulations on environmental protection. Equipped with the Yuchai engine (China 3), the drill rig meets national standards for emissions and environmental. The ramming motor of plunger piston and four-wheel drive improve the working pressure and climbing capacity. The expanded pith and lifting-arm hydraulic cylinder enable it to meet the requirements of limiting position use. Meanwhile, the hydraulic system is improved, thereby proving increased system flow and rotary. The hydraulic cylinder has been optimized, thus making it more reliable.
DTH Drilling Rig For Mining / Quarry
25 Meter Rock Blasting Drilling Rig
| Model Number: | CL351 | Application: | Rock Balsting Drilling Rig,DTH Drilling Rig For Mining |
|---|---|---|---|
| Drilling Depth: | 40m | Drilling Diameter: | 90-165mm |
| Drill Rod: | 3000mm | Rock Hardness: | F=8-16 |
| Rotation Speed: | 0-100rpm | Working Pressure: | 1.05-2.46Mpa |
| Air Consumption: | 11.3-21 M³/min | Feed Stroke: | 3.66m |
| Weight: | 5000kgs | Dust Collector: | Wet & Dry Optional |
| DTH HAMMER: | QL40 DHD340 DHD350Q | Size: | 5900×2210×1470mm |
| High Light: | Atlas Copco Rock Drilling Rig Crawler Rock Drilling Machine Pneumatic Rock Drilling Machine | ||
Characteristics
1. Reliable hydraulic system
2 Powerful engine
A double cylinder diesel engine is used for this crawler drill , its tractive force and gradeability are both quite amazing.
3. Reliable hydraulic pump group
Two separated gear pumps are adopted for the oil supply,Thier reliability and adaptability are both great and maintainace are also very convenient.
4 Flexiable drilling arm.
KG320 low pressure eco-friendly crawler drilling rig comes with flexiblemobile drilling arm which can adjusted by oil cylinder to
get proper drilling angle an accurate height of horizontal hole,The expanded operation area has great enhance drilling machine’s adapability.
Specifiction
| Model | KG320 horizontal and vertical hole digging machine,DTH Drilling Rig For Mining |
| Weight | 4400kg |
| Dimension | 5750*2100*2650mm |
| Drilling hardness | f=8-12 |
| Drilling diameter | 80-105mm |
| Depth of economical drilling | 25m |
| Rotary Speed | 0-140rpm |
| Rotary torque | 1250N.m |
| Lifting force | 20KN |
| Method of feed | Oil cylinder-leaf chain |
| Feed stroke | 3820mm |
| Travelling speed | 0-2.2km/h |
| Climbling capacity | less than 30° |
| Ground clearance | 465mm |
| Tilt angle of beam | down 135°, up:50°, total:190° |
| Swing angle of beam | left;100°, right: 45°, total:145° |
| Swing angle of drill boom | Left:44° , right:45°, total 89° |
| Pitch angle of drill boom | Down:50°, Up:25°, Total:75° |
| Compensation length of beam | 900mm |
| Diesel engine | Yuchai 4DKC4G2-80(58kw/2200rpm) |
| Drill rod | 64*3m/pc or 73*3m/pc |
| Air consumption | 7-15m3/min |
| Max.height of horizontal hole | 2750mm |
| Min.height of hotizontal hole | 350mm |
Service
DTH Drilling Rig For Mining after-sales service should include technical support:
- Provide a professional technical support team, at any time for customers to answer equipment operation, maintenance and troubleshooting problems.
- Supply of spare parts and spare parts to ensure customers have access to high-quality replacement parts in a timely manner. This helps reduce downtime in the event of equipment failure and keeps the equipment operating at its best。
- Providing customized service and support according to the specific needs of the customer, ensuring that the equipment can meet the needs of the customer to the maximum.
tag:
Reviews
There are no reviews yet.